Technical datasheet
Download YOKO technical datasheetThis catalogue reference is not an operating manual. Final values are confirmed in the quotation and technical agreement.
Supplied by YOKO
YOKO-RTJX-D
Automatic Gummy Depositing Machine
YOKO-RTJX-D is a deposited-gummy production family with three reference outputs of 150, 300, and 600 kg per hour. The published configurations use a 45–50 stroke-per-minute reference and cover nominal candy weights of 2–12 g. Formula rheology, depositing temperature, mould geometry, cooling, demoulding, finishing, and room conditions must be reviewed together before an output is agreed.
- Reference capacity / range
- 150 / 300 / 600 kg/hr
- Dimensions
- Confirmed for the selected configuration
- Power
- Confirmed for the selected configuration
Typical applicationGelatin-based nutraceutical or confectionery gummies · Pectin-based gummies after formula and process trials
Material or formatPrepared gelatin or pectin gummy mass · Sugars, syrups, polyols, or alternative sweetener systems after review
Equipment purpose
What this machine is designed to do
The line is intended to prepare, hold, transfer, and deposit a controlled gummy mass into mould cavities before cooling and demoulding. It can be reviewed for conventional, multicolour, or centre-filled products when the selected pumps, manifolds, formula, and mould arrangement support the required format.
Operating sequence
Working principle
Prepared syrup or gummy mass is conditioned in heated vessels and transferred through a temperature-controlled product path to the depositing head. Metering pumps deliver the programmed dose into indexed mould cavities, after which the product passes through cooling and is released by the configured demoulding system. Depositing accuracy and appearance depend on solids, viscosity, temperature, aeration, nozzle timing, mould condition, cooling profile, and the point at which acids, flavours, colours, or active ingredients are added.
Review points
- Three reference configurations provide listed outputs of 150, 300, and 600 kg per hour.
- The source table lists 45–50 depositing strokes per minute and a 2–12 g candy-weight range for each model.
- Heated transfer and holding conditions help limit premature setting between preparation and depositing.
- Vacuum-assisted preparation can be reviewed where entrained air affects clarity, density, or deposit consistency.
- Centre-fill or multicolour capability depends on formula compatibility, pump selection, nozzle arrangement, and mould design.
- A representative trial should measure piece weight, visual uniformity, tails or strings, bubbles, demoulding defects, centre-fill position, and sustained throughput.
Process fit
Applications and compatible materials
Use these references to frame the first technical discussion. Suitability is confirmed with actual material, format, and process data.
Typical applications
- Gelatin-based nutraceutical or confectionery gummies
- Pectin-based gummies after formula and process trials
- Single-colour or multicolour deposited shapes
- Centre-filled products with a compatible pump and manifold configuration
Material or format references
- Prepared gelatin or pectin gummy mass
- Sugars, syrups, polyols, or alternative sweetener systems after review
- Approved colours, flavours, acids, oils, or active premixes
- Compatible moulds and release agents
Reference parameters
Technical specifications
Values are model references for initial selection. The quotation and approved technical agreement define the final supplied configuration.
Technical specifications
| Model | YOKO-150RTJX-D / YOKO-300RTJX-D / YOKO-600RTJX-D |
|---|---|
| Production Capacity (kg/hr) | 150 / 300 / 600 |
| Stroke Speed (n/min) | 45-50 / 45-50 / 45-50 |
| Candy Weight (g) | 2-12 / 2-12 / 2-12 |
| Compressor Air Consumption (m³/min) | 0.3 / 0.3 / 0.3 |
| Compressor Air Pressure (MPa) | 0.4-0.6 / 0.4-0.6 / 0.4-0.6 |
| Power Supply | Configured for the destination electrical standard |
| Working Environment | Temperature: <25 °CHumidity: <55% / Temperature: <25 °CHumidity: <55% / Temperature: <25 °CHumidity: <55% |
Before quotation
Configuration inputs
A useful quotation starts with the product, container or format, target output, available utilities, and destination requirements.
- 150, 300, or 600 kg/h reference line selected from the required sustained output
- Formula preparation, vacuum, buffer, transfer, and temperature-control scope
- Depositing manifold for single-colour, multicolour, striped, or centre-filled formats
- Mould material, cavity drawing, piece-weight range, release system, and change parts
- Cooling, demoulding, oiling or finishing, collection, and downstream coating interfaces
- Utilities, room conditions, recipe controls, cleaning method, documentation, and FAT criteria
Need a model-specific file set?
Start an inquiry for the current selection data, layout information, and privately supplied follow-up files.
Request documentsControlled technical information
Public datasheet and private follow-up files
The public datasheet supports initial selection. Machine videos, operating manuals, and layout files are shared privately after an inquiry and technical discussion.
Video and operating documentation
Machine videos and operating manuals are not published on public product pages. Ask your YOKO contact to supply relevant files privately after the project requirement has been reviewed.
Start a technical inquirySelection questions
Frequently asked questions
Can YOKO-RTJX-D process both gelatin and pectin gummies?
Both formula families can be reviewed, but they do not use identical process conditions. Provide the complete formula or a non-confidential process specification, solids, pH, target cooking and depositing temperatures, viscosity profile, gel point, acid-addition sequence, piece weight, and cooling target. A trial is needed to confirm transfer, dosing, setting, and release for the intended recipe.
How should the 150, 300, and 600 kg/h figures be interpreted?
They are catalogue references for three configurations, not guaranteed output for every formula and shape. Piece weight, cavity count, viscosity, depositing pattern, centre filling, cooling residence time, demoulding, cleaning, and downstream handling can constrain sustained production. The acceptance rate should be defined with one agreed formula, mould, and quality standard.
What is needed for a centre-filled gummy project?
Provide the shell and centre formulations, their temperatures and viscosities at depositing, target shell-to-centre ratio, piece drawing, permissible migration or leakage, cooling profile, and finished-product storage conditions. Pump selection, concentric nozzle geometry, timing, and mould depth must then be demonstrated with representative materials.
Why are room temperature and humidity included in the specification?
The source table references a room temperature below 25 °C and relative humidity below 55%. These conditions can influence setting, surface tack, demoulding, and downstream finishing, but the correct room design depends on the formula and local climate. Confirm the actual permissible range and whether conditioned cooling or dehumidification is part of the line scope.
What should a gummy-line factory trial measure?
Agree the formula, batch size, operating temperatures, mould, target piece weight, run duration, sampling interval, weight tolerance, appearance defects, bubbles, tails, demoulding damage, centre-fill position where applicable, waste, cleaning steps, and sustained output. Record startup and steady-state results separately so short demonstrations are not mistaken for production performance.
Continue the line review
Related equipment
Industrial Gummy Candy Making Machine
The YOKO-RTJX-E industrial gummy candy making machine is intended for nutraceutical gummies and confectionery products. Selection is reviewed against gelatin formulations and pectin formulations, target output, utilities, and line interfaces. Final configuration is defined in the quotation and technical agreement.
- Reference range
- 50 / 80-100 / 150 / 500-600 kg/hr
Pedal-operated Gummy Depositor
The YOKO-BRTJ-A pedal-operated gummy depositor is intended for nutraceutical gummies and confectionery products. Selection is reviewed against gelatin formulations and pectin formulations, target output, utilities, and line interfaces. Final configuration is defined in the quotation and technical agreement.
- Reference range
- Confirmed for the selected product and format
Jelly Candy Making Machine
The YOKO-RTJX-B jelly candy making machine is intended for nutraceutical gummies and confectionery products. Selection is reviewed against gelatin formulations and pectin formulations, target output, utilities, and line interfaces. Final configuration is defined in the quotation and technical agreement.
- Reference range
- 50-100 / 150 / 300 / 450 / 600 kg/hr
Automatic Capsule Filling Machine
YOKO-J-H is a model family for automatic filling of hard capsules with powder or granules. Nine reference configurations span 12,000 to 228,000 capsules per hour and support capsule sizes 00 through 4. Model selection should be based on formulation behaviour, target dose, capsule shell, sustained output, cleaning approach, and the required upstream and downstream interfaces rather than nominal speed alone.
- Reference range
- Model-dependent; see technical specifications
Model-level review
Request a configured quotation for YOKO-RTJX-D
Share the material, product format, target sustained output, available utilities, destination standard, and expected documentation scope.
info@sxyoko.com